Pressure Points Patches

I’ve been diving deeper and deeper into my modular learning how to use the modules with each other. Daren from Control helped me with the patch above. With this patch I have an 8 step sequencer with two rows running. The first row is controlling the pitch of an oscillator and the second a filter cut off and resonance. You will need to use some multiples or Tiptop stackables to make this work. Holding a touch key on the Pressure Points holds the sequences on that step. Adjusting the ADSR’s release really effects the sound. Try adding a sine wave LFO into the ADSR’s Sustain CV control (if your ADSR has one) for some random spikes in the filter opening. Instead of clocking the Pressure Points with a straight clock use something like a uStep and send a few steps a break and then a few more steps for interesting patterns. Lastly try a VCA on the third Pressure Points row for volume control of each step. Enjoy!

“Pressure Points is a controller module, an analog sequencer that is played by hand. Touching the gold plated copper wires (aka Touch Plates), you become part of the circuit, generating a gate signal (Gate OUT), a control signal proportional to the amount of pressure applied (Press OUT) and the 3 Tuned Voltages for the activated Stage.” – Make Noise

For more info: makenoisemusic.com/pressurepoints

2 Comments

  1. When you put a dummy-cable into the T-Gate of the Brains, you can use the touchplates and knobs independently. So you have your seuqnces running and can use the touchplates pressure outs for controlling something entirely different! Somebody on Mufffs gave me this tip.

    Reply

    1. Ah very nice tip! Much appreciated!!

      Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>